Difference between revisions of "Firmware"

From freemyipod.org
Jump to: navigation, search
m (Reverted edits by Owixyze (talk) to last revision by Wolftail)
 
(5 intermediate revisions by 3 users not shown)
Line 14: Line 14:
 
The Nano 3G has the same ''osos'', ''aupd'', and ''rsrc'' sections as the Nano 2G, but it also has an added ''hash'' section. The ''hash'' section is populated with 0x1800 bytes of 0xFF.
 
The Nano 3G has the same ''osos'', ''aupd'', and ''rsrc'' sections as the Nano 2G, but it also has an added ''hash'' section. The ''hash'' section is populated with 0x1800 bytes of 0xFF.
 
==Classic 1G (6G)==
 
==Classic 1G (6G)==
The Classic 1G has the same firmware structure as the 3G. This makes sense because they were released at the same time.
+
The Classic 1G has the same firmware structure as the Nano 3G. This makes sense because they were released at the same time.
 +
 
 
==Nano 4G==
 
==Nano 4G==
The Nano 4G kept the ''osos'' and ''aupd'' sections, but it no longer has the ''aupd'' section. Instead, seven new sections were added. We assume that these have the following functions, the question mark means that we are not completely sure:
+
The Nano 4G kept the ''osos'' but all the old sections were removed. Instead, seven new sections were added:
  
* ''appl'' - bootlogo?
+
* Binaries
* ''bdhw'' - bad hardware?
+
** ''diag'' - Diagnostic mode. This depends on EFI modules being loaded so it can't be booted directly.
* ''bdsw'' - bad software?
+
** ''disk'' - Disk mode
* ''chrg'' - sleep, but charging?
+
* Bitmaps
* ''diag'' - diag mode
+
** ''appl'' - Apple logo for booting
* ''disk'' - disk mode
+
** ''bdhw'' - Bad hardware image
* ''lbat'' - low battery logo?
+
** ''bdsw'' - Bad software image (Use iTunes to restore)
 +
** ''lbat'' - Low battery image
 +
** ''chrg'' - Same as lbat but showing that the iPod is charging
  
 
==Helpful pages==
 
==Helpful pages==

Latest revision as of 02:15, 24 November 2010

This article is about the different parts of the iPod's firmware. There is also a very basic analysis of the firmware headers. If you are trying to get a copy of the firmware files, please see Dumping firmware and Extracting firmware. NOTE: Please excuse the chaotic layout of this article. It is not very comprehensive, but it's still useful.

Nano 2G

osos

This is the main firmware image of the iPod. This part has been encrypted ever since the iPod Nano 2G.

caption

Firmware layout.png

aupd

Here is a comparison between the different aupd partitions of firmware version in the iPod Nano 2G:

caption

IN2G cipher aupd diffs.png

rsrc

This is the resource filesystem of the iPod firmware. It is unencrypted and of not much use to this project.

Nano 3G

The Nano 3G has the same osos, aupd, and rsrc sections as the Nano 2G, but it also has an added hash section. The hash section is populated with 0x1800 bytes of 0xFF.

Classic 1G (6G)

The Classic 1G has the same firmware structure as the Nano 3G. This makes sense because they were released at the same time.

Nano 4G

The Nano 4G kept the osos but all the old sections were removed. Instead, seven new sections were added:

  • Binaries
    • diag - Diagnostic mode. This depends on EFI modules being loaded so it can't be booted directly.
    • disk - Disk mode
  • Bitmaps
    • appl - Apple logo for booting
    • bdhw - Bad hardware image
    • bdsw - Bad software image (Use iTunes to restore)
    • lbat - Low battery image
    • chrg - Same as lbat but showing that the iPod is charging

Helpful pages

http://home.gna.org/linux4nano/download/crypto_synth-1.0.pdf

http://www.ipodlinux.org/wiki/Firmware