Status

From freemyipod.org
Revision as of 12:54, 21 November 2010 by TheSeven (talk | contribs)
Jump to: navigation, search

This status is based on the progress the freemyipod team has made so far.

Nano 2G Nano 3G Nano 4G Nano 5G "Nano" 6G[1] Classic 1G Classic 2G Classic 3G
Code execution Yes Yes Yes No[2] No[2] Yes Yes Yes
UART Yes Yes No[3] No No Yes Yes Yes
USB Yes Yes Yes No No Yes Yes Yes
iBugger[4] Yes Yes[5] Yes No No Yes[5] Yes[5] Yes[5]
emBIOS Yes No Yes No No No No No
SPI Unused Yes No No No Yes Yes Yes
I2C Yes Untested[6] Yes No No Yes Untested[6] Untested[6]
Backlight Yes Untested[6] Yes No No Yes Untested[6] Untested[6]
LCD Yes Untested[6] Yes No No Partially untested[7] Untested[6] Untested[6]
Piezo Yes No No No No No No No
Clickwheel Yes No No No No No No No
Audio Yes No No No No No No No
NAND/Hard Drive Yes No No No No No No No
Power management Yes No No No No No No No
Firmware encryption Yes Partially Yes No No Partially Partially Partially
Accelerometer N/A N/A Yes No No N/A N/A N/A

Annotations

  1. The "Nano" 6G is something entirely new, that doesn't seem to have much in common with the older generations of the Nano series. We don't yet know how this device works and if we want to do something with it at all.
  2. 2.0 2.1 We need a new exploit to execute code on this device.
  3. UART is not really needed here as we can already access the device via USB.
  4. iBugger is being replaced with emBIOS.
  5. 5.0 5.1 5.2 5.3 This iBugger version is very limited as we only have access to the SRAM. This is because the bigger SDRAM is not initialized at the time when our exploit is launched. Someone needs to figure out how to initialize it.
  6. 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 Should be similar to the iPod Classic 1G, but wasn't tested on this platform yet.
  7. The code is complete, but was only tested on one of the LCD types that were used in this series yet.