Difference between revisions of "EmCOREFS"

From freemyipod.org
Jump to: navigation, search
Line 1: Line 1:
{{Template:Outdated|reason=emCOREFS is not compatible with emCORE r891+, due to breaking changes (new debugging method)}}
+
emCOREFS is a FUSE-based filesystem that uses emCORE's Monitor API to provide communication with device's FS. It is mostly complete, and works well. It runs on both Linux and Mac OS X.
emCOREFS is a FUSE-based filesystem that uses emCORE's Monitor API to provide communication with device's FS. It is not yet complete, but most features are done. It runs on both Linux and Mac OS X.
 
  
 
For communication with the device, this application uses libusb 1.0.
 
For communication with the device, this application uses libusb 1.0.
Line 7: Line 6:
 
You need:
 
You need:
  
1. GCC/Make (Xcode on OS X)
+
1. GCC 4.4 and GNU Make (Xcode on OS X)
  
 
2. pkg-config
 
2. pkg-config
Line 16: Line 15:
  
 
5. all dependencies of the above
 
5. all dependencies of the above
 +
 +
===Installing needed packages on Ubuntu===
 +
sudo apt-get install gcc-4.4 make pkg-config libusb-1.0-0-dev libfuse-dev
  
 
===Compiling===
 
===Compiling===
Line 54: Line 56:
 
* Running FUSE with multithreading breaks file reading because of the way these are implemented on emCORE's side. Workaround: use the "-s" option.
 
* Running FUSE with multithreading breaks file reading because of the way these are implemented on emCORE's side. Workaround: use the "-s" option.
 
* Most errors are not handled properly, EIO (Input/output error) is given in many cases where there's a more descriptive error message available. Will be fixed in the future.
 
* Most errors are not handled properly, EIO (Input/output error) is given in many cases where there's a more descriptive error message available. Will be fixed in the future.
 +
* Rename/move in the filesystem itself is currently disabled, since the underlying filesystem call crashes the emCORE kernel. Workaround: move the file/dir on another filesystem, then rename it if needed, then move it back.
  
 
==Future plans==
 
==Future plans==

Revision as of 00:28, 16 October 2013

emCOREFS is a FUSE-based filesystem that uses emCORE's Monitor API to provide communication with device's FS. It is mostly complete, and works well. It runs on both Linux and Mac OS X.

For communication with the device, this application uses libusb 1.0.

Building

You need:

1. GCC 4.4 and GNU Make (Xcode on OS X)

2. pkg-config

3. libusb >= 1.0

4. libfuse >= 2.8 (or fuse4x on x64 OS X)

5. all dependencies of the above

Installing needed packages on Ubuntu

sudo apt-get install gcc-4.4 make pkg-config libusb-1.0-0-dev libfuse-dev

Compiling

  • standard build, no debug messages, only fatal errors on startup are shown.
make


  • debug build, some debug/error messages are shown. libusb debug messages are enabled, too.
make debug


You can prefix any of these with

CFLAGS="-DDEBUG_USB_PACKETS"

in order to have a dump of the usb traffic that's being sent and received.

Testing

  • run the build without FUSE debugging messages, going into the background if it connects to the device successfully.
make test


  • run the build in the foreground, showing FUSE debug messages in the terminal.
make testdebug

Running

You need FUSE >= 2.8 installed. (or fuse4x on x64 OS X)

Currently tested on Linux (Ubuntu 11.04 x86) and Mac OS X (10.6.8 x64).

  • Starting:
./emcorefs <mountpoint>


  • Stopping:
fusermount -u <mountpoint as seen in /etc/mtab>

Known bugs/issues

  • Write support not tested very well.
  • Running FUSE with multithreading breaks file reading because of the way these are implemented on emCORE's side. Workaround: use the "-s" option.
  • Most errors are not handled properly, EIO (Input/output error) is given in many cases where there's a more descriptive error message available. Will be fixed in the future.
  • Rename/move in the filesystem itself is currently disabled, since the underlying filesystem call crashes the emCORE kernel. Workaround: move the file/dir on another filesystem, then rename it if needed, then move it back.

Future plans

  • Merge some functions that are doing similar tasks to reduce code duplication. Return proper error codes in FS operations.

Bug reporting

Main developer: Vencislav "user890104" Atanasov

How to contact: Contact

License terms

emCOREFS is distributed under the same license terms as emCORE.


emCORE is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version.

emCORE is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with emCORE. If not, see http://www.gnu.org/licenses/.